Yes, this one is pretty simple. However, there are a lot of people that shy away from starting a saltwater aquarium when they realize that they have to somehow make, or acquire, actual saltwater to fill their fish tanks with. In reality, mixing up some saltwater takes less time than running water through an RODI filtration system to get purified water. Some people don’t want to take the time to use an RODI filter, but we recommend an RODI filter to purify all of your water for any type of fish tank that you have, be it freshwater or saltwater.
Once you have your canisters of RODI purified water, it really only takes a few minutes to measure your salt mix, pour it into the purified water, mix, and test for specific gravity and salinity using a hydrometer or refractometer. I use Instant Ocean Reef Crystals Reef Salt and literally just follow the directions on the back of the bag. Below, I’ve included a video about how I mix my saltwater.
In the end, it ends up that it takes almost exactly 2.5 cups of salt mix for me to make a 5 gallon bucket of saltwater. These days, I go ahead and put 2 cups straight into my RODI purified water, mix up the salt, do a quick specific gravity and salinity test, and add another 0.5 cup of Instant Ocean Reef Crystals Reef Salt. Obviously, I’m still starting out on the low end of specific gravity and salinity when I only have 2 cups of reef salt in a 5 gallon bucket of water. Personally, I just like to test, and make sure that everything is mixing correctly.
So what do you do if you have a larger tank and you need to make more than 5 gallons of saltwater at a time? There are a few options here. One is to have several 5 gallon buckets of water. For example, if you have a 100 gallon home aquarium, you would need 20 gallons of saltwater to perform a 25% water change. You would need to make 4, 5 gallon buckets of saltwater and make sure that the water conditions all matched.
Maybe you have a 20 gallon container for your saltwater. Hopefully it has wheels. Just fill it up with RODI purified water and add 1o cups of Instant Ocean Reef Crystals Reef Salt. You may want to start with 9 cups, do some specific gravity and salinity tests, and add more salt mix until you get to the correct water conditions. Try this the first couple of times and you may end up finding out that you’re adding that 10th cup of salt mix every time you go to make a 20 gallon container of saltwater.
Whatever way you decide to make your saltwater, and whatever type of salt mix you choose to use, it really isn’t very difficult to mix up some saltwater. Just follow the directions on the salt mix container, and remember to do a few quick checks of your water conditions while your making your saltwater.
Most salt mixes state that the saltwater you make with them can be used immediately. This is true, and some people do this without any detrimental effects to their saltwater tank. However, I like to let my saltwater sit for a little while before placing it into the tank. I like to make sure that all of the salt and all of the beneficial trace elements, and vitamins are properly dissolved in the water. This also allows the saltwater to have some time for gas exchange and oxygenation before pouring it into the tank. If you let your saltwater sit in a container for several days, make sure that you test the water conditions one more time before pouring it into your tank just to make sure that none of those water conditions changed unexpectedly.
How do you make your saltwater? What salt mix do you use? Leave comments below.